HyperLan-Pack

The HyperLan-Pack establishes a high velocity Ethernet wireless link among buildings, factories, CCTV cameras, offshore platforms and temporary installations. In other words, it allows Ethernet networks or Ethernet equipments to be connected to each other.

The HyperLan-Pack is available in two versions: long range (up to 5 Km) and medium range (up to 1.5 Km) at 40 Mbps data rate.

The distance that can be covered increases significantly (up to 50 Km) when data rate decreases to 10 Mbps.

The kit is made of two WiFi units and two parabolic antennas.

The HyperLan-Pack is based upon the WiFi 5.3 GHz standard (IEEE 802.11a), which is not so widely used for WiFi equipments. Then, a good level of security against interferences from existing WiFi networks is ensured.

In summary:

• Cable-free building to building network communications
• Deliver 40 Mbps TCP data rate up to 5 Km or 10 Mbps TCP data rate up to 50 Km, depending to local regulations
• Secure connectivity, narrow beam
• 10/100 Base TX network interface
• IP66 enclosure, Ethernet cable powered (POE)

• 10/100 auto-sensing base TX Ethernet port, waterproof M12 8-point Ethernet connector, auto MDI/MDIX cross-over,
• 25 m RJ45 cable Up to 40 Mbps TCP data rate
• 5.3 GHz wireless Ethernet link (IEEE 802.11a)
• Narrow beam (6°) parabolic directional antenna (23 or 28 dBi depending to models), N-type connector
• Built-in lightning surge protector
• Pre-configured WPA2-PSK, hidden SSID
• Administration: SNMP, ACKSYS NDM
• LEDs signalling for LAN, WLAN network activity and 10/100 mode
• IP 66 aluminum enclosure (L:80 x l:175 x h:57 mm)
• Directional antenna diameter: 44 cm (23 dBi), 60 cm (28 dBi)
• Mast mounting: diameter from 38 to 76 mm Wind loading data: 160 Km/h (200 Km/h with radome), loading: 50 kg (80 Kg with radome)
• Power from the Ethernet cable POE IEEE 802.3af or from a DC source (+9VDC à +75VDC), 7W typical consumption
• Operating temperature: -25°C to +70°C (HR 0-99%), storage: -40°C à +80°C